两个基于2,5-二甲氧基对苯二甲酸和咪唑衍生物的超分子钴配位聚合物的结构及光催化反应

本文以咪唑衍生物为配体,通过水热合成法与钴离子制备出两个配位聚合物:{[Co(DTA)(1,4-DIB)(H₂O)]·H₂O}_n(1)和[Co(DTA)(1,3-BMIB)]_n(2)(1,4-DIB=1,4-二(1H-咪唑-1-基)苯; 1,3-BMIB=1,3-二(4-甲基-1H-咪唑-1-基)苯;H₂DTA=2,5-二甲氧基对苯二甲酸)。利用X射线单晶衍射、粉末衍射、热失重、元素分析、红外光谱以及固体紫外-可见光谱等对两个配合物进行了表征。结构分析证实配合物1和2是通过二维结构堆积成的三维超分子化合物。粉末衍射测试则显示两个配合物在水中有很好的稳定性。固体紫外-可见光谱显示两个配合物属半导体材料,对紫外-可见光有很强的吸收作用。在光催化实验中,配合物1和2可加快亚甲基蓝的降解速度。     

Passive vibration absorber effect on the machining surface quality of a flexible workpiece

This paper presents a study of the vibratory behaviour of a flexible workpiece subject to a milling end operation. Indeed, this vibratory behaviour is critical, especially when the excitation frequency is near to the resonance. For this reason, passive vibration suppression is considered in order to attenuate the dynamic response of the milled workpiece and decrease the dynamic effect on the resulting machined surface roughness and flatness. In order to confirm the efficiency of the passive vibration suppression, the vibratory behaviour and the quality (roughness and flatness) of a machined surface are studied without and with passive absorber (TMD) using a finite-element model.     

基于粒子滤波的运动目标光电定位仿真研究

运动目标的光电定位不能像静止目标那样简单做均值滤波，鉴于此，引入粒子滤波算法，它不仅可以应用于线性系统，而且还适用于非线性系统。结合光电定位需求，详细推导了计算公式及初值和参数选取公式，对只含测量噪声以及含有测量和运动噪声等的海面运动目标光电无源定位算法进行了仿真计算，验证了算法的有效性，讨论了噪声强度对滤波效果的影响，滤波参数选择对滤波效果的影响，目标运动方式对滤波跟随性的影响，重采样算法对滤波效果的影响等。所得结论为:粒子滤波可用于运动目标光电定位过程，可有效降低定位误差；粒子滤波算法具有较强鲁棒性，适用于噪声较大、目标运动形态变化大等情况。     

三维格子Boltzmann方法研究上升双气泡的运动特性

应用格子Boltzmann三维模型，对双气泡在静水中的运动进行数值研究.采用八点差分和十八点差分格式分别求解一阶▽φ和二阶▽²φ可以有效避免气液密度比过大造成的数值不稳定问题.结果表明：当两个相同直径的气泡在上升时，位置靠上的气泡形状变化像单气泡上升一样，而位置靠下的气泡会受到前一个气泡尾迹的影响，并有很明显的形状变化.当两个气泡直径不同时，不管初始位置如何，大气泡总会对小气泡造成强烈的影响.     

Analysis of phantom centering positioning on image noise and radiation dose in axial scan type of brain CT

ABSTRACT

This study examined the dose and image quality according to the position change of a human phantom in a CT scan. This study used an MDCT 128 Slice CT Scanner instrument. An axial scan was performed with a 16 cm CTDI phantom of a human phantom, and the dose was measured using a pencil chamber meter. The phantom was scanned 10 cm above and below the isocenter and 15 cm above the right and left. The position of the phantom is indicated by C-0 in the isocenter position, S-10 in the upper 10 cm, I-10 in the lower 10 cm, R-15 in the right 15 cm, and L-15 in the left 15 cm. The test was performed 30 times using the brain CT protocol to calculate the dose and the dose width product (DWP). The acquired images were analyzed using the ImageJ program. Statistical analysis was performed using SPSS with one-way ANOVA (p < .05). The mean DWP values of the CT scanner were C-0 31.97 mGy·cm, S-10 24.52 mGy·cm, I-10 24.28 mGy· cm, R-15 17.95 mGy·cm, and L15 17.6 mGy·cm. Compared to the isocenter (C-0), the DLP values measured at each site were 23.3% for S-10, 24% for I-10, 43.8% for R-15, and 44.9% for L15. A significant difference in the one-way ANOVA statistical process was observed (p>0.05). C-0 was measured to be 7.42 HU, S-10 7.87 HU, I-10 8.4 HU, R-15 117 HU, and L-15 13.6 HU for evaluating the image quality. Compared to C-0, S-10 was 5.39%, I-10 was 13.2%, R-15 was 57.6%, and L-15 was 83.2%. The PSNR for S-10, I-10, R-15, and L-15 was 17.37, 17.5, 16.62, and 16.37 dB, respectively. A good quality image can be obtained by positioning the subject precisely in the isocenter in the axial scan, if possible, because the irradiated dose to the subject is low, which can lead to an increase in noise in image reconstruction.     

Molecularly engineered graphene surfaces for sensing applications: A review

Graphene is scientifically and commercially important because of its unique molecular structure which is monoatomic in thickness, rigorously two-dimensional and highly conjugated. Consequently, graphene exhibits exceptional electrical, optical, thermal and mechanical properties. Herein, we critically discuss the surface modification of graphene, the specific advantages that graphene-based materials can provide over other materials in sensor research and their related chemical and electrochemical properties. Furthermore, we describe the latest developments in the use of these materials for sensing technology, including chemical sensors and biosensors and their applications in security, environmental safety and diseases detection and diagnosis.     

利用三维虚拟技术突破物质结构教学*——从演示型工具到探索型工具的转变

针对物质结构教学的抽象性,开发了一套基于三维虚拟技术的物质结构教学软件,可对结构模型进行旋转、平移、缩放、切割、镜像、插入或删除原子(团)及启停预先设置的动画等操作,强大的交互功能不仅能对分子或晶体结构如构造异构、立体异构、晶体的堆积方式、晶胞的划分、配位数、晶体结构中的空隙及空间利用率等问题进行效果极佳的可视化教学,另一方面,通过对B₁₂与C₆₀分子空间构型转变的探究揭示数学构型的重要性,通过对六方晶胞占有原子个数的探究修正晶胞模型,通过对金属晶体的4种基本堆积方式成因的探究提出“半密置层”概念来完善紧密堆积规律等案例,展示出三维虚拟技术在微观结构探索发现方面的巨大潜力。     

锰氧化物/碳氮三维网络结构复合材料的制备及锂电性能

通过硝酸锰和乙醇的水热反应在三聚氰胺泡棉(MF)上生成三氧化二锰颗粒,氮气下高温处理后形成锰氧化物负载碳氮三维网络结构的复合物。碳氮网络结构提高了充放电过程中材料结构的稳定性及导电性,且烧结过程中产生的孔道结构有利于锂离子传输,使得该复合材料作为负极在锂离子电池中表现出优异的充放电性能和循环稳定性。材料的比容量和循环稳定性大大提高,经500℃处理后的MnO/CNnws-500材料在160次循环后仍然保留590 m Ah·g~(-1)的比容量,达到氧化亚锰理论容量755 m Ah·g~(-1)的78%。     

卫星运动预测及规避的建模与求解

近年来,随着各国侦查卫星系统的不断完善,有效根据观测数据预测卫星的轨迹,同时建立适当的规避防范措施变得尤为重要·通过研究地面监测站监测的卫星数据及地理信息,提出了一种基于三维坐标系变换的卫星轨迹求解模型,具体建立模型的方法为:建立4种不同的坐标系,通过卫星坐标在4种坐标系中的变换,将地面检测站检测到的卫星数据进行处理,拟合出卫星的六个运动参数,得出卫星运动轨迹方程,并较为精准的预测卫星被观测站观测到的情况,以及任意时刻星下点的经纬度坐标.针对卫星的运动情况,为满足我方军事目标的运动需求,根据新疆地图建立军队行军路线的有向图,然后,在考虑卫星规避的情况下对每条路线进行模拟分析,最终,通过每条路线模拟分析的结果进行比对,得出最优的行军路线.